- LED Display Screen Indoor
- LED Display Screen Outdoor
- LED Lighting
- LED Screen Control and Graphic Card
Sengeco Lighting & Electrical Sdn Bhd
3-B, Jalan BK 9/2,
Bandar Kinrara,
47100 Puchong,
Selangor, Malaysia.
+603-5886 0220
+603-5886 0220
Q & L Display Board Supply
(Southern Office)
21, Jalan Pelanduk,
Taman Pertama,
81000 Kulaijaya,
Johor, Malaysia.
+607-6623686
fuquan412048
http://www.qlleddisplay.com
Novastar Receiving Card Armor Series (A9s)
| Previous | 3 / 3 | Next |
A9s is a high-end receiving card developed by NovaStar. It has a small size and features a large loading capacity, with a single card loading up to 512×512 (PWM IC) pixels. The A9s supports pixel level brightness and chroma calibration by working with NovaLCT and NovaCLB to perform calibration on each pixel. It can effectively remove color discrepancies and greatly improve LED display image consistency. In addition, it also supports image rotation in 90° increments, creating a richer image and offering users the ultimate visual experience. On-site setup, operation, and maintenance were all taken into account when designing the hardware and software of the A9s, allowing for an easier setup, more stable operation, and more efficient maintenance.
Specification:
Advanced hardware design:
- The small hardware footprint is suitable to applications with limited cabinet space and small pixel pitch.
- Uses dust-resistant high-density connector to limit effects of dust and vibration, resulting in high stability and reliability.
- Integrated network transformer features simple design and improved magnetic compatibility, helping user’s products to successfully pass the EMC certification.
Useful software design:
- Supports LVDS transmission (supported by dedicated firmware program).
- Supports smart module (supported by dedicated firmware program).
- Supports quick seam correction.
- Supports 3D function.
- Supports auto module calibration.
- Supports Mapping function.
- Supports setting of pre-stored image on receiving card.
- Supports management of module’s Flash.
- Supports voltage and temperature monitoring of card without use of peripherals.
- Supports monitoring of Ethernet cable communication status (supported by dedicated firmware program).
- Supports 5-pin LCD module.
- Supports image rotation in 90° increments.
Specification:
|
Input voltage |
DC 3.3 V–5.5 V |
|
Rated current |
0.5 A |
|
Rated power consumption |
2.5 W |
|
Operating temperature |
-20°C–70°C |
|
Storage temperature |
-25°C–125°C |
|
Operating humidity |
10% RH–90% RH |
|
Dimensions |
80.0 mm × 45.0 mm × 9.1 mm |
|
Net weight |
22.3 g |
|
Certifications |
|
|
Packing |
An antistatic bag and anti-collision foam are provided for each receiving card. Dimensions of the packing box: 378 mm × 190 mm × 120 mm. Each box contains 40 receiving cards. |